Hydraulic Dual-mould Curing Vulcanizing Machine
•The machine is used to produce all-steel radial tyres for cars.
•The machine is a dual-mould, frame-type, independent units; the fuel cylinder is placed in the center of the upper beam. The moulds are opened/closed along linear guide rail; the moulds are heated by heating plates,
•One hydraulic station can drive 7 or 8 vulcanizing machines, and can adjust the opening and closing speeds.
•Control system adopts PLC programmable controller as the real-time control core, the industrial computer is man-machine operation interface, can set the vulcanization process parameters, the vulcanization real-time parameter acquisition, the preservation, the alarm and the historical parameter inquiry.
Hydraulic Dual-mould Curing Vulcanizing Machine
Technical Parameters
Description
|
Unit
|
Specifications
|
800
|
Number of Curing Chambers
|
|
2
|
Heating Plate Diameter
|
mm
|
800×800
|
Max Mould Clamping Force
|
KN
|
250
|
Mould Height
|
mm
|
100-200
|
Suitable Steel Ring Diameter
|
in
|
16-22
|
Theoretical Open/Close time
|
s
|
15-20
|
Max hydraulic pressure
|
MPa
|
18
|
Vulcanized External Pressure (Max)
|
MPa
|
0.8
|
Vulcanized Internal Pressure (Max)
|
MPa
|
0.8
|
Movement pneumatic pressure
|
MPa
|
0.7
|
Control pneumatic pressure
|
MPa
|
0.35
|
|